From Seo Wiki - Search Engine Optimization and Programming Languages

Jump to: navigation, search

In the C++ programming language, decltype is an operator for querying the type of an expression. It will be included in the upcoming version of the C++ Standard, often referred to as C++0x. Its primary intended use is in generic programming, where it is often difficult, or even impossible, to name types that depend on template parameters.

As generic programming techniques became increasingly popular throughout the 1990s, the need for a type-deduction mechanism was recognized. Many compiler vendors implemented their own versions of the operator, typically called typeof, and some portable implementations with limited functionality, based on existing language features were developed. In 2002, Bjarne Stroustrup proposed that a standardized version of the operator be added to the C++ language, and suggested the name "decltype", to reflect that the operator would yield the "declared type" of an expression.

decltype's semantics were designed to cater to both generic library writers and novice programmers. In general, the deduced type matches the type of the object or function exactly as declared in the source code. Like the sizeof operator, decltype's operand is not evaluated.



With the introduction of templates into the C++ programming language, and the advent of generic programming techniques pioneered by the Standard Template Library, the need for a mechanism for obtaining the type of an expression, commonly referred to as typeof, was recognized. In generic programming, it is often difficult or impossible to express types that depend on template parameters,[1][2] in particular the return type of function template instantiations.[1]

Many vendors provide the typeof operator as a compiler extension.[3] As early as 1997, before C++ was fully standardized, Brian Parker proposed a portable solution based on the sizeof operator.[3] His work was expanded on by Bill Gibbons, who concluded that the technique had several limitations and was generally less powerful than an actual typeof mechanism.[3] In an October 2000 article of Dr. Dobb's Journal, Andrei Alexandrescu remarked that "[h]aving a typeof would make much template code easier to write and understand."[4] He also noted that "typeof and sizeof share the same backend, because sizeof has to compute the type anyway."[4] Andrew Koenig and Barbara E. Moo also recognized the usefulness of a built-in typeof facility, with the caveat that "using it often invites subtle programming errors, and there are some problems that it cannot solve."[5] They characterized the use of type conventions, like the typedefs provided by the Standard Template Library, as a more powerful and general technique.[5] However, Steve Dewhurst argued that such conventions are "costly to design and promulgate", and that it would be "much easier to ... simply extract the type of the expression."[6]

In 2002, Bjarne Stroustrup suggested extending the C++ language with mechanisms for querying the type of an expression, and initializing objects without specifying the type.[1] Stroustrup observed that the reference-dropping semantics offered by the typeof operator provided by the GCC and EDG compilers could be problematic.[1] Conversely, an operator returning a reference type based on the lvalue-ness of the expression was deemed too confusing. The initial proposal to the C++ standards committee outlined a combination of the two variants; the operator would return a reference type only if the declared type of the expression included a reference. To emphasize that the deduced type would reflect the "declared type" of the expression, the operator was proposed to be named decltype.[1]

One of the cited main motivations for the decltype proposal, was the ability to write perfect forwarding function templates.[7] It is sometimes desirable to write a generic forwarding function that returns the same type as the wrapped function, regardless of the type it is instantiated with. Without decltype, it is not generally possible to accomplish this.[7] An example, which also utilizes the proposed trailing-return-type:[7]

int& foo(int& i);
float foo(float& f);
template <class T> auto transparent_forwarder(T& t)> decltype(foo(t)) {
  return foo(t);

decltype is essential here because it preserves the information about whether the wrapped function returns a reference type.[8]


Similarly to the sizeof operator, the operand of decltype is unevaluated.[9] Informally, the type returned by decltype(e) is deduced as follows:[1]

  1. If the expression e refers to a variable in local or namespace scope, a static member variable or a function parameter, then the result is that variable's or parameter's declared type
  2. If e is a function call or an overloaded operator invocation, decltype(e) denotes the declared return type of that function
  3. Otherwise, if e is an lvalue, decltype(e) is T&, where T is the type of e; if e is an rvalue, the result is T

These semantics were designed to fulfill the needs of generic library writers, while at the same time being intuitive for novice programmers, because the return type of decltype always matches the type of the object or function exactly as declared in the source code.[1] More formally, Rule 1 applies to unparenthesized id-expressions and class member access expressions.[10] For function calls, the deduced type is the return type of the statically chosen function, as determined by the rules for overload resolution.[11] Example:[10]

const int&& foo();
int i;
struct A { double x; };
const A* a = new A();
decltype(foo()) x1; // type is const int&&
decltype(i) x2; // type is int
decltype(a->x) x3; // type is double
decltype((a->x)) x4; // type is const double&

The reason for the difference between the latter two invocations of decltype is that the parenthesized expression (a->x) is neither an id-expression nor a member access expression, and therefore does not denote a named object.[12] Because the expression is an lvalue, its deduced type is "reference to the type of the expression", or const double&.[9]

In December 2008, a concern was raised to the committee by Jaakko Järvi over the inability to use decltype to form a qualified-id,[13] which is inconsistent with the intent that decltype(e) should be treated "as if it were a typedef-name".[14] While commenting on the formal Committee Draft for C++0x, the Japanese ISO member body noted that "a scope operator(::) cannot be applied to decltype, but it should be. It would be useful in the case to obtain member type(nested-type) from an instance as follows":[15]

vector<int> v;
decltype(v)::value_type i = 0; // int i = 0;

In September 2009, Daveed Vandevoorde proposed a wording change to correct the issue.[16] The solution involved adding a decltype-specifier to the list of allowed nested-name-specifiers, and changing the wording to emphasize that a nested-name-specifier denotes a class rather than naming it.[16]


decltype is slated for inclusion in the next version of the C++ Language Standard, informally referred to as C++0x.[10] It is provided by a number of compilers as an extension. Microsoft's Visual C++ 2010 compiler provides a decltype operator that closely mimics the semantics as described in the standards committee proposal. It can be used with both managed and native code.[8] The documentation states that it is "useful primarily to developers who write template libraries."[8] decltype was added to the mainline of the GCC C++ compiler in version 4.3,[17] released on March 5, 2008.[18] The operator is also present in Codegear's C++ Builder 2009,[19] and the Intel C++ Compiler.[20]


Cite error: Invalid <references> tag;

no input is allowed. Use <references />

External links

Personal tools

Served in 0.222 secs.