From Seo Wiki - Search Engine Optimization and Programming Languages

Jump to: navigation, search

Tcpkill can be used to kill connections to or from a particular host, network, port, or combination of all. These programs take standard Berkeley Packet Filters(BPF) filters so read the tcpdump man pages for examples on how to create those filters. Also, there are other sites on the Internet that have example filters. This can be used for both port mirroring and arp spoofing[1]

For example, to prevent any connections to the host use this command:

/usr/sbin/tcpkill −9 host

The computer that is attempting to go to that site will be blocked from that site only, but can surf any other site. It is a good idea to either redirect the output into nothingness ( > 2>/dev/null 1>/dev/null) or into a file for later analysis (> file.tcpkill ). By default, it will redirect output to the console.

More hosts can be specified with the command:

/usr/sbin/tcpkill −9 host and host

To block well−known ports eg., napster (port 8888 and port 6699) or gnutella (port 6346), the command:

/usr/sbin/tcpkill −9 port 8888 and port 6699


/usr/sbin/tcpkill −9 port 6346 --> will do the trick.

DOS with tcpkill

Tcpkill can be used to create a DOS attack within a WAN or LAN, and this can be use done by using a sniffer like dsniff or tcpdump to look at the packets that are being transmitted and to pick a target that you want to deny service. Assume the target has been identify as, a simple command like;

tcpkill host -9

will kill all outgoing tcp packets (TCP segment) between the target and the rest of the network. Prior to the attack the target can receive packets from the rest of the network, the default interface for most computers is eth0 because most computers onl



the -i option specify which interface you want the program to listen on. The default option interface on most computers is eth0, because most computers only have one interface.[2]


The -1 to -9 specify the degree of brute force you want the attack to use on the target, with -1 being the least brute and -9 being the most brute.Computers on network with very fast connection usually require more brute force in oder to successfully perform a DOS attack on them. Otherwise the command can be run without the -1 to -9 option or the -i option.[2]

This is a description of one of the various dsniff programs. This text belongs to the dsniff “README” written by the author Dug Song.

Name Description
tcpkill Kills specified in-progress TCP connections (useful for libnids-based applications which require a full TCP 3-whs for TCB creation). Can be effective for bandwidth control.

See also: filesnarf[1], macof [2], mailsnarf[3], msfsnarf[4], sshmitm[5], tcpnice[6], urlsnarf[7] webmitm[8], webspy[9].


  1. Dave Wreski,, “And away we spoof!!!”
  2. 2.0 2.1 Dug Song.
Personal tools

Served in 0.114 secs.